Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
TM-DB25 LED light effect
Item no. 1488540
Intended Use
The product generates lighting effects and is used in private areas on dance floors, in party
rooms, etc.
It is approved only for connection to 220-240 V/50 Hz alternating current. Do not use any other
power supply.
The product may only be used in enclosed indoor locations. Outdoor use is not allowed. Con-
tact with moisture, for example in bathrooms or the like, must be avoided.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, the product may be damaged. Moreo-
ver, the improper use involves risks such as short-circuits, fire, electric shocks, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• LED light effect
• 2x set screw
• 2x rubber spacer
• 2x tooth washer
• Mounting bracket
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the websit
Explanation of Symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual which must be adhered to.
The arrow symbol indicates special tips and operating information.
The product is only intended to be installed and used in dry indoor rooms; it must not
get damp or wet.
Observe the operating instructions!
This symbol indicates the minimum distance to the illuminated surfaces.
0.5m
Safety Instructions
Please read the operating instructions carefully and pay particular attention to
the safety instructions. We do not assume liability for injuries/material damag-
es resulting from failure to observe the safety instructions and the information
in these operating instructions regarding the proper handling of the product.
Furthermore, in such cases, the warranty/guarantee will be null and void.
• The product is designed in compliance with safety class I and must only be used
with an earthed wall socket connected to the public electric grid.
• Never touch the mains plug with damp or wet hands. There is danger of a life-
threatening electric shock!
• To completely disconnect the device from the mains, the mains plug has to be
pulled out of the mains socket.
• Devices operated using mains voltage must be kept out of the reach of children.
Therefore take precaution when using the device when children are around, es-
pecially, if they attempt to push objects through the openings of the enclosure into
the device. There is a life-threatening electric shock hazard.
• Do not place open flames, such as burning candles, on or near the light effect
spotlight.
• Never position vessels or containers containing liquids, such as glasses, buckets,
vases or plants, in the direct vicinity of the system. Liquids could seep into the
casing and thus impair the electrical safety of the device. Furthermore, there is a
significant risk of fire or of a lethal electric shock! If this is the case, de-energise
the appropriate mains socket (e.g. switch off circuit breaker and RCD) and then
remove the mains plug from the mains socket. Do not use the product after that
and take it to a specialist workshop.
• Never plug the power plug into a mains socket immediately after the device was
taken from a cold to a warm environment. The condensation that forms might
damage the device. Allow the device to reach room temperature before connect-
ing it. Wait until the condensation has evaporated.
• Always disconnect the power unit from the mains socket, if the device is not going
to be used for a while.
• For safety reasons always unplug the mains plug from the socket during a thun-
derstorm.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look directly or with optical instruments into the light!
• Never leave the device on unattended.
• Please observe the additional safety instructions in the individual chapters of this
manual.
• Do not leave packing materials unattended. It may become a dangerous plaything
for children.
• Do not use the device in a tropical climate.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• Please handle the product carefully. It can be damaged by impact, blows, or by
being dropped, even from a low height.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a trained technician.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialist workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
Control Elements
2
1
4
5
1 FREQUENCY dial
2 INTELLIGENT DEGREE dial
3 FUSE holder
4 Power switch
5 Mounting bracket
6 Attachment screw
3
6
Werbung
Inhaltsverzeichnis
