Werbung
Verfügbare Sprachen
Verfügbare Sprachen
23050L
Input Cable
Power Plug
3. SPECIFICATION
POWER SOURCE: AC 240V, 60Hz
POWER CONSUMPTION: 10.8W
4. HOW TO OPERATE
1. Plug in to 240V outlet.
2. Set the temperature control knob according to the type of
plastic.
L ----- Thin plastic (bumper etc.)
M ----- To about 5mm thick plastic (spot light etc.)
H ----- Thick or hard plastic
3. Turn on the main switch.
4. Choose suitable heating repair pin and set it to tip of the
grip.
5. Please form the part to repair as original shape.
6. Presses the switch button on the grip and hold about 10
seconds until the pin is hot enough to weld. Then press the
pin gently against the place to repair.
SW-Stahl und Werkzeugvertriebs GmbH
Leverkuser Straße 65
D-42897 Remscheid
On / Off
Temperature
Control
Fuse
Knob
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
Output Cable
Temperature
Indicator Lamp
Switch
For heating
Shaped
Grip
www.swstahl.de
Werbung
