Installation; Preparations; Grill Assembly - tepro Albertville 4008 Bedienungsanleitung

DANGER Risk of fire!
To prevent overheating
of the appliance and fire,
the appliance must not be
covered.
– The appliance remains hot for a
considerable time after switching it
off. Take care not to burn yourself
and do not place any objects onto it.
There is a risk of fire.
DANGER Risk of burns!
This electric grill becomes
very hot during operation. For
prevention of burns, do not
touch the hot surfaces directly
with your skin. Always hold
the appliance with the heat-
insulated handles (9).
– Keep a minimum distance of 1 m from
inflammable material like wallpaper,
curtains, and blinds.
– Always be attentive and exercise
caution. Do not use the appliance
when you cannot concentrate or are
tired or under the influence of drugs,
alcohol, or medication. Even the
slightest distraction during use of the
product can lead to serious injuries.

Installation

Preparations

DANGER risk of injuries!
Failure to observe the
instructions can cause
problems when using the grill.
28
P150378_TEPRO_Albertville_4008_20151111.indd 28
GB
– Observe all assembly instructions
listed here.
1. First, read the assembly instructions
completely.
2. Take sufficient time for the assembly
and prepare a level work area of two
to three square meters.
3. Small parts like the handles may be
pre-installed.
4. When the appliance is used as a
table-top grill, installation of the feet
is not required.

Grill Assembly

1. Unpack the grill and remove all
packing foils. Keep the packing
materials outside the reach of
children and dispose of it according
to the regulations after assembly of
the grill.
Mounting the feet
A
B
A. Put the metal stator
on the steel pipe, let
the screw through the
steel pipe and tighten it
with butterfly screw.
B. Put the metal stator
into the slot according
to the arrow indicate.
11/11/15 5:43 PM