Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
TROUBLESHOOTING
Check the following points if there is no audio output from your stereo:
• Make sure the WR-1BT is powered.
• Make sure an audio cable or an optical cable is correctly connected to the
WR-1BT.
• Make sure that the audio source selection of your amplifier is correct with
your audio connection (analog audio or TOSLINK).
• Make sure the volume of the stereo is set to a comfortable listening level.
• Make sure you are within the range (10 m).
• Make sure the Bluetooth function is enabled on your mobile device.
• Make sure you are playing music from your mobile device.
...............................................................................................................................................
7
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Bluetooth profile:
Supported codecs:
Range:
Carrier frequency:
Devices memorized:
Analog audio output:
Frequency range:
Channel separation:
S/N ratio:
THD:
Digital audio output:
Wave length:
Light output:
Dimensions:
Weight:
www.omnitronic.de
100-240 V AC, 50/60 Hz ~ via incl. power unit
3 W
A2DP/IOPT
aptX, SBC
10 m (line of sight)
2.4 GHz
8
3.5 mm stereo jack
10 Hz - 22 kHz
-45 dB
100 dB
0.05 %
Toslink
640-670 nm
-17 dBm
75 x 70 x 20 mm
56 g
23
Werbung
Inhaltsverzeichnis
Fehlerbehebung
