Omnitronic WR-1BT Bedienungsanleitung Seite 18

Connection Example
Analog Connection
1 Connect the included 3.5 mm jack cable to the jack AUDIO OUT on the
WR-1BT.
2 Connect the other end of the jack cable to an audio input on your stereo
or active speaker. If necessary, use the included adapter cable (3.5 mm
jack/RCA L/R).
Digital Connection
1
Connect a TOSLINK cable to the optical output on the WR-1BT
(recommended).
2
Connect the other end of the TOSLINK cable to an audio input on your
stereo.
Power Supply
1
Connect the included power unit to the jack DC 5V and then to a mains
outlet (110-240 V~, 50/60 Hz).
2
The connection indicator shortly flashes to show that the unit is powered
on and ready for being paired to your mobile devices.
www.omnitronic.de
18