Warm Audio WA-47jr Bedienungsanleitung Seite 4

NOW LET'S GET STARTED!
INTRODUCTION
The WA-47jr FET offers one of the most coveted classic microphone capsule designs in an affordable
microphone circuit. The WA-47jr FET uses a high quality discrete transformerless circuit with Toshiba
FET's, Wima film capacitors and Panasonic electrolytic capacitors. The WA-47jr FET brings the tone
and character of the classic '47 style microphone to you through the most critical component (its cap-
sule) and is able to maintain an aggressive price-point by simplifying the rest of the circuit topology.
The WA-47jr FET's simplified circuit is in no way a low quality circuit but is simpler to build and uses
less components than a vintage tube microphone, which allows us to offer it at such a bargain price.
The WA-47jr FET uses the same capsule as our flag-ship WA-47 tube microphone and sounds wildly
similar to the WA-47.
FEATURES
1. Pattern Select Switch
This switch selects the polar pattern for the WA-47jr FET's capsule. The three polar pattern options are:
Omnidirectional, Cardioid, and Figure-Of-Eight.
2. XLR Output
The WA-47jr FET's output is a balanced, gold-contact 3-pin XLR which accepts a standard XLR to XLR
shielded microphone cable.
3. High Pass Filter Switch
This switch engages a 70hz high pass filter for reducing rumble and other subsonic information.
4. -10dB Pad Switch
This switch engages a -10dB pad within the active circuitry.
3
4
1
2
3