Safety Guidelines; Proper Usage; General Rules Of Security; Product Specific Rules Of Security - Holzmann MSA315 Bedienungsanleitung

11

SAFETY GUIDELINES

11.1 Proper usage

Holzmann Maschinen cannot be held responsible for any injuries or damages if there was per-
formed manipulation or adjustments to the machine.
The following items are some rules about security which should be followed by everyone in
common when using tools.
Please read them all very carefully before using such tools and then keep this manual after
reading.
You must absolutely follow these rules when using in case of fire, personal injury and other
accidents.
For another usage and resulting damages or injuries HOLZMANN MASCHINEN
doesn't assume any responsibility or guarantees.

11.2 General rules of security

Keep the workshop clean: It's easy to cause accidents if the workshop is in mess.
Don't allow strangers and children to be close to the workshops:
Keep tools carefully: Unused tools should be kept in dry and high places where children's
hands couldn't reach to, please lock them if it's necessary.
Be careful to choose tools: Don't use small tools or accessories to finish burdensome jobs.
Maintain tools very carefully: Keep cleaning in order to make them perform fully.
Keep vigilance: Keep your brain sober when working. Don't operate dynamoelectric tools
when feeling tired.
Check broken parts and accessories: Operators should carefully check whether every part,
every accessory or every protecting equipment has been broken before intermittently us-
ing tools in order to decide whether such objects perform again.
Advise: It's easy to cause broken tools, even personal hurt if you don't use accessories
from original Company.

11.3 Product specific rules of security

Follow these precautions carefully. Improper use of any welder can result in in-
jury or death.
ONLY OPERATE WELDER IN DRY LOCATIONS and on cement or masonry floor. Keep area
clean and uncluttered.
KEEP ALL COMBUSTIBLES AWAY FROM WORK SITE.
DO NOT WEAR CLOTHING THAT HAS BEEN CONTAMINATED with grease or oil.
KEEP CABLES DRY AND FREE FROM OIL AND GREASE and never coil around shoulders.
SECURE WORK WITH CLAMPS or other means; don't overreach when working.
NEVER STRIKE AN ARC ON A COMPRESSED GAS CYLINDER
DON'T ALLOW THE INSULATED PORTION OF THE ELECTRODE HOLDER TO TOUCH THE
WELDING GROUND WHILE CURRENT IS FLOWING.
SHUT OFF POWER AND UNPLUG MACHINE WHEN REPAIRING OR ADJUSTING. Inspect be-
fore every use. Only use identical replacement parl.
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
SAFETY GUIDELINES
Schweißgerät/ welding machine MSA250
Seite 23