Nussbaum RUGBOARD WA 9xx + S Bedienungsanleitung Seite 31

At that point, the installation of the WLAN configuration tool is
complete. Now, access the Windows wireless. On the desktop,
right on 'My Network Places' -> 'Properties'. In the list that opens
up, right-click on the icon for the wireless card, and select
'Properties'.
AD U9001 N 06.12.07
Select 'Internet Protokoll (TCP/IP), and click 'Properties'.
This is the default situation: The card is configured on automatic
setting of an IP addresse (DHCP).
You have to change the settings to a fixed IP address, as shown
in the next picture. Use the IP address 192.168.100.1. Excepti-
on: If you want to use multiple PCs in a combination, assign a
different address to each PC, using the range 192.168.100.2-
192.168.100.9. As you will have to know the IP address of a PC
in order to access it with the rugboard later on, it is recommen-
ded that you mark the assigned IP address e.g. on a small sticker
31