Installation; Unpacking; Scope Of Delivery; Available Special Accessories - Nussbaum Rugboard Wa 9Xx + S Bedienungsanleitung

2

Installation

Thanks for purchasing the ATT Rugboard. You decided for a high
tech product which follows the highest quality standards. A
universal solution for all applications that call for a convenient
secondary display and control unit.
2.1

Unpacking

- Before unpacking the Rugboard package 0 986 400 U18N,
make sure that there is sufficient desk space.
- A clean and dry surface close to a wall power outlet is required.
- Do not damage the packaging, as you need it in case of later
transport, e.g. in a warranty case.
- Make sure that all components listed below are present and in
good conditions. If there are components missing or damaged,
contact your dealer rightaway.
2.2

Scope of Delivery

- Rugboard incl. rechargeable battery
- Power supply
- WLAN PCI card including driver CD
- WLAN antenna extension
- Rugboard cover
- Manual
- Server Installation CD
Fig 1: Scope of Delivery
2.3

Available special accessories

- Access point, preconfigured '30'
- Access point, preconfigured '31'
AD U9001 N 06.12.07
2.4
The Rugboard supports two operating modes:
- Wireless operation (on battery) without power supply
- Plugged operation, with or without battery inserted
If the battery is inserted, and the external power supply
plugged in, the battery is being charged automatically, even
while the rugboard is not switched. Same thing while the
rugboard is parked in the optional DockinStation.
i For best possible lifetime and performance of the battery,
2.5
At the front side of the Rugboard, you can find a series of
buttons with predefined function, out of which the following
1 987 009 UC0N
ones are of special importance:
1 987 009 U1DN
1 987 009 U1CN
Front View
1 987 009 U1BN
1 987 009 UC1N
(2)
ADU9001N
(3)
(5)
(6)
Bild 2: Rugboard - Vorderansicht
1 987 009 U66N
1 987 009 U67N

Operating Modes

it is recommended to completely charge the battery, and
then discharge it completely by unplugging the power
supply while the Rugboard is on. Repeat this procedure
five times before starting regular operation.

The Rugboard and its control elements

Server change
Show/hide SoftKeyboard
Cursor keys
Enter key
1 2 3 4 5 6
25