White Balance - Proled Setup Tool Bedienungsanleitung
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
PROLED
With the FUNCTION keys
buttons
or
you can select the channel mode. The unit you selected will light green.
Once the channel mode has been selected, press the ENTER button to confirm your choice.
Then the progress bar will be displayed for 1-2 seconds and the fixture lights up green
several times to show that the modification has been saved.
3.1.3. White Balance
In "Setting Manual" mode you can select the desired white balance model with the
FUNCTION keys
displayed. With the FUNCTION keys
selected will light green. With the DATA buttons
Select YES if you want zu adjust the white balance. Press the DATA buttons to select the
fixture group that you want to modify and press ENTER to confirm your choice. With the
FUNCTION keys
use the DATE keys
again to confirm your choice. Then the progress bar will be displayed for 1-2 seconds and
the fixture lights up green several times to show that the modification has been saved.
3.1.4. Manual Color
Press the MENU button, press ENTER button and you can select the desired manual color
with the FUNCTION keys
unit 1-9999. The unit you selected will light green and the display shows
DATA buttons
or
manual color. After pressing the ENTER button and the display shows
FUNCTION keys
Then use the DATE keys
again. Then the progress bar will be displayed for 1-2 seconds and the fixture lights up
green several times to show that the modification has been saved.
3.1.5 Fade Speed
Press the MENU button, press ENTER button to enter and you can select the desired
manual color with the FUNCTION keys
select YES or NO. Select YES if you want zu adjust the fade speed. After pressing the
ENTER button and the display shows
adjust the fade speed (0-255) and press ENTER again. Then the progress bar will be
displayed for 1-2 seconds and the fixture lights up green several times to show that the
modification has been saved.
3.2 Auto Setting
www.proled.com
or
you can choose unit 1-9999 and with the DATA
or
. When you press the ENTER button, "W-Balance 0001" will be
or
you can select red, green, blue, cool, warm and amber. Then
or
to adjust the white balance (125-255) and press ENTER
or
. With the FUNCTION keys
you can select YES or NO. Select YES if you want zu adjust the
or
you can select red, green, blue, cool, warm, amber and strobe.
or
to adjust the manual color (0-255) and press ENTER
or
you can choose unit 1-9999. The unit you
or
or
. With the DATA buttons
Then use the DATE keys
6
SETUP TOOL
you can select YES or NO.
or
you can choose
or
info@proled.com
With the
With the
you can
or
to
Inhaltsverzeichnis
