Package Contents - Axis 206 Schnellinstallation

AXIS 206 Quick Installation Guide
AXIS 206 Network Camera
Front
Status
indicator
(outer ring)
Focus
ring
Follow these steps to install the AXIS 206 on your local network (LAN):
1. Familiarize yourself with the camera (this page).
2. Connect the camera - see Cable Connections, on page 4.
3. Assign an IP address - see Installation Methods, on page 4.
For more information, please see the User's Manual, which is available on the CD
included in this package. Updated versions can be obtained from www.axis.com

Package Contents

Item
Network Camera
Power adapter
Camera stand
Cable clip
CD
Printed Materials
Quick Installation Guide
Notes
AXIS 206.
The adapter is country-specific. Please check that the adapter is correct for your location.
Supplied with 3 mounting screws. The extension section is ready fitted.
Fixes to back panel for holding power cable.
Documentation and software.
• AXIS 206 Quick Installation Guide
• Axis Warranty Document
Rear
Mounting
lock ring
Network
indicator
Control
button
Network Power
indicator
connector
Page 3
Serial number
label
Power
connector