GIS TS-MX300-HF Bedienungsanleitung Seite 15

TS-MX300-HF
(13,56 MHz System)
Creating applications
Applications for MX300 are written in MX300 Basic. A complete description of the
MX300 Basic language is contained in the MX300 Software Suite.
You can load the MX300 Software Suite from our homepage at http://www.gis-
net.de/rfid.
The MX300 Basic Manual can be shown directly from MX300 Explorer using the button
"Basic ?".
Sample applications
Together with the TS-MX300 some MX300 Basic sample applications are delivered.
These sample applications are installed to the device. They can be extracted from the
device using "MX300 Explorer" and then be changed.
Usage and changing of these applications is explicitly granted.
ISO15693Logger
Reading the UID of a ISO15693 transponder and viewing the content. Each reading is
tagged with data and time and stored in a text file, where file name contains the date.
Shows the usage of the ReadUID command and also the usage of the display and
possibilities in storing to file. Here the usage of the actual time for creating a file name
and storing data is also shown. Additionally the possibility of showing pictures at the
display is shown.
MIFARE® Logger
Reading the UID of a MIFARE® transponder and viewing the content. Each reading is
tagged with data and time and stored in a text file, where file name contains the date.
Shows the usage of the ReadUID command and also the usage of the display and
possibilities in storing to file. Here the usage of the actual time for creating a file name
and storing data is also shown. Additionally the possibility of showing pictures at the
display is shown.
ISO15693Edit
Read a block of a ISO15693 transponder, Edit the content and write back to the
transponder.
Shows usage of block read and write commandos as long as viewing and editing of
data at the display.
Additionally the possibility of showing pictures at the display is shown.
GiS Gesellschaft für Informatik und Steuerungstechnik mbH * Tel: +49 (0)7026-606-0 * Email: rfid@gis-net.de