GIS TS-MX300-HF Bedienungsanleitung Seite 13

TS-MX300-HF
(13,56 MHz System)
Main menu
Start App
List of applications is shown. By selecting one of the applications this is started.
Setup
Autostart
On
Off
Battery
NiMh Accu
Alcaline
Display
Light
Language
German
English
French
Turn off delay
Date/Time
Bluetooth
GiS Gesellschaft für Informatik und Steuerungstechnik mbH * Tel: +49 (0)7026-606-0 * Email: rfid@gis-net.de
Selection of the application to be started at power on
Do not start application at power on
Use discharging curve for NiMh accumulator
Use discharging curve for alcaline battery
Input of background light intensity in bar diagram
Ç
use to increase intensity and
To leave the input without storing changes use
To store settings and leave the input, use
Menu in German language
Menu in English language
Menu in French language
Input mask for time until automatic turn off. If 999 is set as
duration, the automatic turn off is deactivated.
Input mask for date and time
Input mask for Bluetooth setup items like device name and
password. The device is listed in the
Bluetooth network always with device
name TS-MX300-xx where xx is the
changeable number.
The password which is used to
authenticate the device is pre set to
1234 and can be changed freely.
With Always active: the activation of
the Bluetooth module at system start
can be activated or not. Please note that activation of the
Bluetooth module causes more power consumption.
È
to decrease intensity.
Å
.
C or ON.
Bluetooth
Ver: 2.0-201006012
Adr: 00:11:22:33:55:66
Name: TS-MX300-
Password:
Always active: