Storch Scirocco 3000 S Bedienungsanleitung Seite 29

Function
The fan heater has an output selection switch and a thermostat. The output selection
switch has three positions: Scirocco 2000: 0 - 1.000 W - 2.000 W / Scirocco 3000
S: 0 - 1 500 W - 3.000 W. The thermostat operating range is +5°C to +40°C. It starts
the ventilator at the selected output level when heating is required. If the temperature in
the radiator becomes too high for any reason, the temperature limit switch disables the
appliance.
Care
Clean the exterior of the fan heater regularly as dust and dirt can cause a fire hazard.
Repairs
The following measures must be performed by the manufacturer, an authorised service
centre, or another qualified person: replacement of the power cable.
Cleaning of the PTC element with compressed air. In case of severe soiling, remove the
top cover.
29