m-e CR-RO500 Betriebsanleitung Seite 23

• We are not liable for property damage
or for personal injury caused by improper
handling or non-compliance with the safety
instructions. In such cases, the warranty is
no longer valid!
• Please do not use this product at hospitals
or medical establishments. Even if the
product transmits only very weak radio
signals, they could cause interference with
the functioning of life-preserving systems.
The same may also be valid for other areas.
• The product may only be installed by a
qualified electrician who is familiar with the
relevant regulations (e.g. VDE)! Improper
work on the mains voltage not only poses a
danger to yourself, but others as well!
• If you do not have technical expertise in
mounting, do not mount the product yourself;
engage a professional to do the work.
• The design of the "Roller shutter" wireless
flush-type switch corresponds to protection
class I. The only voltage source that may be
used for the "Roller shutter" wireless
flush-type switch is standard mains voltage
(230 V AC, 50 Hz, with protective
conductor) from the public mains supply.
• Mounting may only be carried out if all the
poles of the supply lines to the wireless
flush-type switch are disconnected from the
mains voltage. Otherwise there is a risk of
electric shock!
• The unit is only suitable for use in a dry
location indoors (not in a bathroom or other
damp locations). Avoid getting the unit
damp or wet.
• The product may only be mounted and
operated in a fixed location. Place the
product in an appropriate flush-type box or
surface box, for example.
EN
23