Intended Application - m-e CR-R1 Betriebsanleitung

INTENDED APPLICATION

Thank you for purchasing an
product.
This "Repeater" wireless socket can be
used to wirelessly switch a connected
electrical load on and off manually on
the device or using a Cuveo wireless
wall switch or a Cuveo wireless remote
control. This "Repeater" wireless socket
can also increase the range of a Cuveo
wireless system whereby the wireless
signal is received, evaluated, and resent.
Contents
"Repeater" wireless socket
•
User guide
•
The "Repeater" wireless socket is only
designed and suitable for operation in a
dry location indoors.
The safety notes and operating instructions
in this user guide must be followed. This
information serves to not only protect the
device, but more importantly the life and
health of users. You should therefore read
through the entire user guide before using
the product.
Any other use excluding the above will
cause damage to the product. In addition,
improper use can result in other hazards
such as short circuits, fire, electric shock, etc.
The product must not be modified or altered
in any way!
This product satisfies national and European
legal requirements.
EN DE
11