Muting The Sound; Selecting The Picture Format; Freeze Function; Multi-Picture Display - Monacor TFT-1002LED Bedienungsanleitung

the next parameter . To deactivate the bar graph,
press the button "Menu / OK" .
When all settings have been made, the bar
graph will automatically disappear at the end of
the display time set in the OSD menu . When a pic-
ture parameter is selected and no setting is made,
the bar graph will already disappear after a few
seconds .
Notes concerning the change of parameters
1 . Contrast ... Sharpness for AV, HDMI and HDMI 2
As soon as the value of a parameter is changed, the
monitor will go to the picture mode User and save the
change for this mode only .
2 . Red, Green, Blue
Before changing the values of these parameters, set the
option User for the menu item Color Temp. in the OSD
☞
menu ( chapter 6 .11 .1) . This is the only way to save
the modified values as individual settings under User .

6.6 Muting the sound

To mute the sound, press the button
appear in the top left corner of the picture (it will
disappear when the button "Menu / OK" is pressed
or when another function is activated) .
To unmute, press the button once again . The
sound will also be unmuted when the source name
is indicated, when the source is changed or when
the volume is changed .

6.7 Selecting the picture format

Use the button "Zoom" to switch between differ-
ent picture formats (not possible for the source PC):
Full  Zoom1  Zoom2  4 : 3  Panorama  14 : 9 
The indication of the picture format will disappear
at the end of the display time set in the OSD menu .

6.8 Freeze function

To freeze the picture (not possible for the source
PC), press the button "Freeze" . Freeze will appear
in the top left corner of the picture . It will disappear
at the end of the display time set in the OSD menu .
It will also disappear when the button "Menu / OK"
is pressed .
To unfreeze the picture, press the button
"Freeze" again . The freeze function will also be
deactivated when another source is selected .
18

6.9 Multi-picture display

In case of a multi-picture display, the picture of a
secondary video source (secondary picture) will be
displayed together with the picture of the video
source selected (main picture) . The multi-picture
display is adjustable via the OSD menu or via the
remote control; however, the menu offers addi-
tional setting options (
1) To switch between the display modes, press the
button "PIP/
no multi-picture display
 small secondary picture in the main picture
 medium-size secondary picture in the main
picture
 large secondary picture in the main picture
 pictures side by side in full aspect ratio
 pictures side by side in the format 4 : 3 
Each time you switch to another mode, the
names of the sources will briefly appear in the
: Mute will
top left corner of the screen (name of the sec-
ondary source underneath the main source) .
2) To select the secondary video source, press the
button "Source / " .
Note: For multi-picture display, the sources HDMI and
HDMI 2 cannot be selected both at the same time .
3) To switch between four positions of the second-
ary picture for a picture-in-picture display, press
the button "Position":
left top
 left bottom
 right bottom
 right top 
4) To swap the picture assignment of the two
sources in the multi-picture display, press the
button "Swap" .
When the video source is changed with the buttons
"PC / HD" or "AV1/AV2", the monitor will return
to the single-picture mode .
☞ chapter 6 .11 .5) .
":