Preparations; Prepare The Remote Control; Replace The Remote Control Battery - Blaupunkt LS 2400 Bedienungsanleitung

Prepare the Remote Control

The provided Remote Control allows the unit
to be operated from a distance.
Even if the Remote Control is operated within the
•
effective range (6m), remote control operation may
be impossible if there are any obstacles between the
unit and the remote control.
If the Remote Control is operated near other products
•
which generate infrared rays, or if other remote
control devices using infra-red rays are used near the
unit, it may operate incorrectly. Conversely, the other
products may operate incorrectly.

Replace the Remote Control Battery

1. Pull out the battery tray and remove the old battery.
2. Place a new CR2025 battery into the battery tray with correct polarity (+/-)
as indicated.
3. Insert the battery tray back into the slot.
Precautions Concerning Batteries
• When the Remote Control is not to be used for a long time (more than a
month), remove the battery from the Remote Control to prevent it from leaking.
• If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries
with new ones.
• Do not use any batteries other than those specified.
• Do not heat or disassemble batteries.
Never throw them in fire or water.
• Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short
circuit, leak or explode.
• Never recharge a battery unless it is confirmed to be a rechargeable type.

Preparations

First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the protective tab
to activate the remote control battery.
10
30˚ 30˚
Max. 6 m