Werbung
Quicklinks
CLEARANCES
CLEARANCES
& INSTALLATION
& INSTALLATION
Please read these instructions completely
Please read these instructions completely
before operating the EcoSmart™ Fire.
before operating the EcoSmart™ Fire.
Grate Range
Curved
Grooved
11kgs, 24.2lbs
8.9kgs, 19.6lbs
Scope 700
Scope 500
46.3kgs, 102.1lbs
34.8kgs, 76.7lbs
Modern
Traditional
7.3kgs, 16.1lbs
7.7kgs, 17lbs
Scope 340
8.4kg, 18.4lbs
Werbung
Verwandte Anleitungen für EcoSmart Fire Curved
Inhaltszusammenfassung für EcoSmart Fire Curved
- Seite 1 CLEARANCES & INSTALLATION & INSTALLATION Please read these instructions completely Please read these instructions completely before operating the EcoSmart™ Fire. before operating the EcoSmart™ Fire. Grate Range Curved Modern Traditional Grooved 11kgs, 24.2lbs 7.3kgs, 16.1lbs 7.7kgs, 17lbs 8.9kgs, 19.6lbs Scope 700...
- Seite 2 INserTING WITHIN a fIrebOx seTTING b. INserTING WITHOUT a fIrebOx seTTING MODels Overhead (Y) Rear (b2) Front (b1) Overhead (Y) Rear* (b2) Front (b1) Sides (a) Curved Grooved 800mm [31.5in] 30mm [1.2in] 45mm [1.8in] 1650mm [65in] 30mm [1.2in] 45mm [1.8in] 600mm [25.6in] Modern...
- Seite 3 DEUTSCH FRANÇAIS abstände und Installation Distances de dégagement & Installation bitte lesen sie diese anweisungen vor der Inbetriebnahme des Veuillez lire ces instructions dans leur intégralité avant de faire ecosmart™ fire vollständig durch. fonctionner le système ecosmart™ fire. GraTe raNGe-TOleraNzeN DéGaGeMeNTs POUr la GaMMe GrIlle Stellen Sie sicher, dass die Flamme einen Mindestabstand von 1.500 Assurez-vous que la flamme de l’appareil est positionnée loin (1500mm...
- Seite 4 7. Using the allen key supplied, secure the Grate into position by tightening the screw (C) which is located on the outside of the leg of the Grate. Do not over-tighten. CUrVeD, TraDITIONal Equipment required: pencil, long handled phillips head screw driver, hammer and drill.
- Seite 5 (C), qui est située à l’extérieur du pied de l’appareil. zu fest an. Veillez à ne pas serrer excessivement. CUrVeD, TraDITIONal CUrVeD, TraDITIONal Erforderliches Werkzeug: Bleistift, Kreuzschlitzschraubendreher mit Matériel nécessaire: crayon à papier, tournevis cruciforme à manche langem Griff, Hammer und Bohrer.
- Seite 6 T: +61 2 9997 3050 E: info@thefirecompany.com.au REV090911...