Installing The Power Supply; Installing Pci-E/Pci Card(S); Removing The Front Fascia; Installing The Front I/O Connectors - Corsair Crystal 460X Installationsanleitung

CRYSTAL SERIES 460X

5. Installing the Power Supply

Install the PSU into the
lower chamber of the case,
and secure with four screws
from behind.

6. Installing PCI-E/PCI Card(s)

1. Remove thumbscrews and
corresponding slot covers.
2. Install the expansion
card and secure with
thumbscrews.
2
11
1

7. Removing the Front Fascia

Unscrew the front panel, then
gently but firmly pull away from
the chassis.

8. Installing the Front I/O Connectors

See your motherboard's
manual for front panel header
locations and pin-outs.
USB 3.0
POWER SW
HD AUDIO
HDD LED
POWER LED –
RESET SW
POWER LED +
12