Preparation - Inline 99150l Bedienungsanleitung

www.inline-info.com
Note:
(1) The audio inputs are only used in TX mode. When in TX mode, transceiver needs
an audio source to transmit. It must be fed with an audio signal from a connected de-
Note vice such as a television,video game system, computer, MP3 player, etc.
(2) The audio outputs are used with RX mode only. When in RX mode, transceiver is
receiving an audio signal and passing that signal from its output to the input of some
type of amplification device like a home stereo, speaker, car audio, etc.
Note

7.2 Preparation

Step 1: Stick one side of the included double side sticky gel mounting strips to the bottom of the
transceiver. Mount the transceiver onto the side or top of your TV or audio system. Avoid placing
transceiver behind the TV or any audio d evice.
Step 2: Plug the included Micro USB charging cable into an USB power adapter or any powered
USB port and the charging port on the rear of the unit.
Step 3: Select the desired mode (TX/RX) by sliding the toggle switch situated on the rear of the
transceiver. The LED will start flashing slowly indicating the unit is switched „ON". To switch off
transceiver, slide the TX/RX toggle switch to the „OFF" position.