Midland XTC400 Bedienungsanleitung Seite 12

Minimum System Requirements
Processor 3.2GHz or faster
Ram 1GB or greater
Video Card 256MB or greater
Video playback requires H.264 codec.
To obtain more information go to xtcactioncam.com
Upgrade & Firmware
Note: Be sure the camera has the latest firmware
To check the firmware version connect the camera to your
mobile device, open action connect App. go to settings -
about - version.
To upgrade your device visit actioncamxtc.com and follow
the procedure.
Midland XTC400 - 20
Indications
Battery status
Battery LED Meaning
Solid Blue Full battery level (fully
charged)
Blinking Blue Medium battery level
(battery charging)
Solid Red Low Battery level
Blinking Red* Battery level too low
No light Battery is depleted
*Note: When the red battery LED begins blinking, be pre-
pared to charge the battery because the camera will stop
recording at this point.
Memory card LED Status
Memory Card LED Meaning
Solid Blue 66% - 100% available
Blinking Blue 33% - 66% Available
Solid Red 0% - 33% Available
Blinking Red 0% Available
No light No card / Card error
Blinking Red/Blue Formatting - Upgrading
Firmware
Front LED Status
Front LED Meaning
Blinking Green Recording 1080p
Blinking Blue Recording 720p
Blinking Red Recording WVGA
Solid Blue Wi.Fi Enabling
Solid Green Wi-Fi On
Solid Red USB Connected
Switch Position
Position Meaning
Wi-Fi Up (ON) Wi-Fi Enabled
Wi.Fi Down Wi-Fi Disabled
Light Settin Up (N) Normal Light Mode
Light Setting Down (L) Low Light Mode
Resolution UP (H) Record at 1080p 30
Resolution Downn (L) Record at 720p 60
Recording Time
Memory 720 Record Time 1080 Record Time
size
512MB 6.5 Minutes 5.5 Minutes
1 GB 13 Minutes 11 Minutes
2 GB 26 Minutes 22 Minutes
4 GB 52 Minutes 44 Minutes
8 GB 104 Minutes 88 Minutes
16 GB 208 Minutes 176 Minutes
Midland XTC400 - 21