Operation - Renkforce 1217950 Bedienungsanleitung

Operating instructions
Bluetooth music receiver
®
Item no. 1217950
Intended use
The music receiver is designed to receive wireless audio signals (voice or music) from
mobile phones, tablets, laptops and other devices that have an appropriate Bluetooth
connection. The device has a transmission range of up to 10 metres when there are
no obstructions.
The audio signal can be picked up on the receiver on a 3.5 mm jack socket. Power is
supplied via the USB port on a computer or via a USB power adaptor (not included).
The A2DP Bluetooth protocol and the SBC codec must be supported in order to
®
transmit music. Bluetooth is a technology which is used to transmit data wirelessly
®
over short distances.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Music receiver
• USB power cable (100 cm)
• 3.5 mm jack cable (174 cm)
• 3.5 mm jack/cinch adapter cable (10 cm)
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Do not place the music receiver near to sources of heat.
• Do not listen to excessively loud music over an extended period of time.
This may damage your hearing.
• Only use the USB power cable provided to operate the device.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operating elements
Front view
1
®

Operation

1. Connect your audio playback device (speakers, amplifier etc.) to the jack socket
(2) on the music receiver using the jack cable provided. Use the adapter provided
if the connection takes place via a cinch socket.
2. Ensure that you place the product in a secure position.
3. Now connect the low-voltage connector on the USB cable to the low-voltage
socket (3) on the music receiver.
4. Connect the USB-A connector on the USB cable to the USB port on a computer.
5. The LED on the music receiver starts to flash in regular intervals. This indicates
that the receiver is searching for Bluetooth
a) Establishing the Bluetooth
1. Now activate the Bluetooth
audio data to the music receiver. For example, on an Android smartphone you will
find the function in 'Connections' in the settings. In Apple iOS, you will find the
function under Bluetooth
of the devices concerned.
2. Enter the PIN code for a connection. Use 0000 if necessary. Some devices do not
require a PIN code. The music receiver can save up to a maximum of 8 devices.
3. Once the device is displayed as "Music Receiver", tap on it to pair your device (e.g.
your smartphone) with the music receiver. If no other devices are connected to the
music receiver, this device will automatically be selected for audio playback. The
LED (1) flashes once every second during the pairing process. The LED stays on
once a connection has been successfully established.
b) Playback
1. You can play back an audio file on your device. The audio signal is automatically
transmitted to the Bluetooth
to switch the output between the Bluetooth
using the play the files.
2. It is also possible to play a video. The picture will be displayed on your device (e.g.
tablet) while the sound will be played on the audio device that is connected to the
music receiver.
3. Use your smartphone or tablet to control the playback and the volume.
c) Disconnecting the Bluetooth
1. To disconnect your device from the music receiver, navigate to the Bluetooth
settings again and terminate the connection. Alternatively, you can simply turn off
the Bluetooth function.
®
Multiple devices may be paired with the music receiver via the Bluetooth
function, but only one of them can be used to play back audio. If you want to
use another device as the signal source, the current device must first be
disabled.
Rear view (schematic)
AUDIO DC 5 V
3
-
OUT
2 AUDIO
OUT
-capable devices.
®
connection
®
function on the device that you want to use to transfer
®
settings. Look up the details in the instruction manuals
®
receiver. Depending on the device, it is also possible
®
receiver and the device that you are
®
connection.
®
+
DC 5 V
+
-
®
®