MA lighting MA 8Port Node Bedienungsanleitung Seite 34

Connectivity
(Illustration shows optional accessories)
8 x DMX OUT (XLR 5 pin)
RJ45 Ethernet socket
PowerCon (blue)
PowerCon Out (grey)
Main switch
USB socket
MENU –button
POWER-LED green
LINK-LED green
DATA-LED green
BOOT-LED red
Ports can also be configured to DMX IN
Network connection
100 – 240 V~ (+/- 10%) 50/60 Hz
Automatic operation, no switching necessary!. PowerCon plug (blue) is
Included in delivery. The open end must be fitted with a shock-proof plug and
must meet the local requirements.
ATTENTION! The total current power consumption of the units connected in
series must not exceed the maximum of the power source!
To turn on or off the device
To update via USB-stick - do not connect peripherals –mouse, keyboard, etc.!
To switch the menu and setting of parameters (see also Quickstart ON/OFF)
Steady = device is ready
Steady = light signals correct connection to onPC or console
Flashes = data-traffic
Lights during the boot process
(USA, Kanada)
MA 8Port Node
Data
Transport
Safety
instructions
Safety and
environmet
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
33