MA lighting MA 8Port Node Bedienungsanleitung Seite 27

Data
Current:
Power cable:
Socket type Power In:
Socket type Power Out:
Required plug connector:
Power source
Power input:
NOTE
For trouble-free operation in Fullduplex / Halfduplex – mode, the MA 8Port Node requires the
connection to a network port operating in "auto-negotiate-mode".
The setting possibilities of the transmission bandwidth remain unaffected by this
specification.
100 – 240 V ~
(+/- 10%)
Automatic operation, no switching necessary!
Only adequately protected cables may be used
(min. Ø = 3 x 1,0mm²).
(Power supply cabel and connector not included ex works)
PowerCon (blue) by NEUTRIK AG, Liechtenstein
PowerCon (grey) by NEUTRIK AG, Liechtenstein
ATTENTION! The total current power consumption of the units
connected in series must not exceed the maximum of the power
source!
Must meet the standard in the respective country. The plug
connector is not included in delivery.
The socket should be serviced by qualified personnel only!
max. 20 VA
50 / 60 Hz (USA, Canada
MA 8Port Node
Data
Transport
Safety
instructions
Safety and
environmet
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
26