Herunterladen Inhalt Inhalt Diese Seite drucken

MyTinySun folkslight 1 GoPro Light Bedienungsanleitung Seite 12

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Before using the folkslight system please check if it is sub-
ject to any traffic restrictions in your country.
CHarGInG
• Only charge in a dry, cool and not fire-endangered envi-
ronment. For safety reason, the charging process will not start
if the light is overheated. Enable sufficient cooling to start the
charging process.
• To charge the light, switch it off completely (see chapter
„Switch off the
light") and connect the mini USB port of the
folkslight with a USB charger (max. 2A charging current) or a
PC via USB cable.
• During the charging process the
is switched off if the process is completed.
mOUnTInG
The UNC tripod mount and the GoPro® compatible mount
provide a variety of attachment possibilities without any tools.
Suitable accessory can be found at our webshop.
FIrmware UPdaTe
Download
firmware
the latest
update mode
of the light is
to a PC. If the
light
is
already connected
longer time, e.g. for charging, the
activated
by
pushing
the
front button
The activated update mode will kept for 7 seconds and
signaled by
bright turquoise rear
front Status-LED
is red, it
on
your PC. The
for your light
activated
by
connecting
via
to the PC for a
update mode
can also be
briefly.
Status-LED.
w w w . M y T i n y S u n . c o m
Within
these
7
must
be started on the PC.
But the update program can also be started first, it waits until
a light is USB connected or is put into the update mode and
then the update program install the firmware update.
The update process itself takes only a few seconds. After the
update, the rear Status-LED goes out.
The light is ready to use.
wHY we OFFer dIFFerenT mOdes and PrO-
Grams?
The folkslight system is a sophisticated high-end outdoor
lighting system.
It has two operating modes. The "simple" mode (factory-pre-
set) suffices in most cases for the ambitious outdoor activists
and for this type of user, the control function is deliberately
kept simple.
The "expert" mode is designed for outdoor professionals,
where specific requirements can be catered for. The "expert"
mode is equipped with a range of programs which meet
the varying requirements of serious, more professional users.
Depending on the application, programs can be selected
which provides more light, (we have called these "power"
USB
programs) or deliver light over an extended period (and
we've called these "eco" programs).
You can find further details on the supplemental sheet.
seconds, better earlier, the
update program

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis