Operation; Safety Instructions - MyTinySun folkslight 1 GoPro Light Bedienungsanleitung

User manUal
Thank you for choosing our product. Please read this
manual carefully and follow the instructions to ensure safe
operating.

OPeraTIOn

Lense beam Lense beam angle
angle 17° elliptic 18° x 45°
UNC tripot Front Button
mount Status-LED integrated
COmPOnenTs
•
1 GoPro® Edition LED Light
• USB-Cable
• User manual - Getting started
Mini USB Rear button
port Status-LED integrated
GoPro®
compatible mount
w w w . M y T i n y S u n . c o m

saFeTY InsTrUCTIOns

WARNING! Never look directly into the beam of the light.
This may cause permanent visual impairment. While using
the light, especially at standstill, the housing may heat up and
can cause minor burns if it is touched. The light must not be
operated by children. Keep it out of the reach of children and
animals. Never short-circuit or operate the lithium batteries
with the polarities reversed, never expose the batteries to fire
or any liquids, never heat them up or deform them, this may
cause fire. Mechanically or electrically damaged lithium bat-
teries should be immediately disposed. Do not touch or spill
the leakage of liquids from lithium batteries to the environ-
ment, they are hazardous. Only store the light in a dry, cool
and not fire-endangered area.
ImPOrTanT InFOrmaTIOn
• Before you use the light, the integrated battery have to be
fully charged (see chapter „Charging") and you have to
deactivate the security-lock (see chapter
lock off").
• A protective-circuit is activated if the light suffers from
insufficient cooling, the light power will be reduced and at
a critical state switches off. The
flashing twice to indicate the activation. Ensure sufficient
cooling for maximum light output and keep your distance to
inflammable materials.
• The folkslight system is water resistant according to DIN EN
60529. Cleaning the light with pressurized water, especially
with a high pressure cleaner may cause permanent damage.
„Unlock - security-
rear Status-LED red
will be