1. Package contents
1x IB-256WP, 1x silicone sleeve, 1x USB 3.0 data cable, 1x screwset, 1x manual
2. Key Features
•
USB 3.0 Host interface 5 Gbit/s
•
Support SATA III 6Gbit/s and UASP
•
Compact aluminum enclosure
•
LED Display for power and HDD access
•
HDD 7 - 15 mm height, capacity not limited
•
Supports: Windows, macOS
•
Plug & Play and Hot Swap
•
Including silicone protection sleeve
•
Switch for write protection - against data loss / virus infection
3. HDD Installation
During the HDD assembly all cabling has to be disconnected from the computer.
Read-Only-Mode:
1) disconnect the IB-256WP from the Computer,
2) push the switch to the left.
4. Application
4.1 The external HDD can be connected to or disconnected from the computer via USB
cable without shutting down the computer.
4.2 Please await the end of read/write operations before disconnecting the HDD to avoid
data lost.
4.3 A new HDD must first be initialized, partitioned and formatted by the operation system
to be displayed by the system.
4.4 If the hard disc isn´t recognized instantly by the operating system please check:
- if the driver software is installed (USB),
- if the HDD is initialized, partitioned and formatted.
Manual IB-256WP