Heitronic 36580 Installations- Und Bedienungsanweisung Seite 3

GB Installation and operating instructions
Stainless steel outdoors light Lima
Art. No. 36580
Many thanks for deciding to buy our lights.
Our lights are made out of sturdy, high value materials and will provide you with attractive lighting. This light is
made out of stainless steel. This light is made out of stainless steel and is equipped with a polycarbonate diffuser.
This guarantees you an appealing look and a high degree of corrosion resistance. The light can be used both
indoors and also outdoors.
Please read through installation and operation instructions carefully and keep these in a safe place.
We do not accept liability for damage to persons or property caused by non-observation of the instructions,
improper handling or for unauthorized changes made to the product.
Package contents:

1 Outside light, stainless steel

Assembly material

Installation and operating instructions
Technical data:
Article
number
36580
Before installation:

The light can only be used outside of the packaging.

Take the light carefully out of the packaging.

ake sure, before operating the light that this has not become damaged during transportation. The light
must not be operated if the cable or the electrical parts are damaged. Repairs can only be done by a
specialist electrician.

Keep the packaging materials well away from children and pets. Danger of suffocation !

Careful. The packaging contains small parts which can be swallowed by children.
Safety and warning notes:

Putting the light into service is strictly forbidden if it is damaged.

Never repair faulty parts yourself. Repairs must be done by a trained specialist.

Never let children play unattended in the area of the lights or other electrical devices.

Never expose the lights to a direct jet of water garden hose or high pressure cleaner, for example) and
never immerse the lights into water or other liquids !

The illuminant is hot when it is in operation. The outer lamp housing will also be hot. Do not touch the
light with your bare hands when it is being operated.

Do not bring the product into direct contact with extreme heat or an open flame.

The entire product may neither be changed nor converted. Changes made to the light lead to annulment
of the guarantee (warranty).
Changing the illuminant

Only use illuminants of the light bulb type energy saving light with a max. of 11 W. The use of other
illuminants can lead to overheating.

The power supply has to be disconnected before changing the illuminant.

The light has to cool off for a sufficient period of time if is changed immediately after the illuminant fails.

Unscrew the light housing from the base.

Carefully unscrew the faulty illuminant from the holder. Screw the new illuminant carefully into the holder.
Do not use any force or extreme pressure. Check that the illuminant is properly seated in the holder
before putting into service.

Unscrew the light housing back on to the base. Make sure that the gasket forms a proper seal when you
reassemble the light.
Care and maintenance:

You must make sure that the power supply is disconnected before cleaning.

Use a dry, or slightly damp cloth for cleaning.

Never use chemicals or abrasives for cleaning.
Disposal:

Used electronic equipment must be brought to public connection points and must not be disposed of as
household waste.
Installation instructions Art. No. 39580
Connection Illuminant l
Energy saving light
230 V, 50 Hz
230V, E 27, 1 x max. 11W
Protection
type
IP 44
Page 1 of 2
Protection
class
I
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Status 09.2011