Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuse-holder on the rear panel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX control channels:
DMX512 connection:
Sound-control:
Flash-rate:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Number of LEDs:
LED type:
Beam angle (single-color beam):
Maximum PAN-movement:
Maximum TILT-movement:
Dimensions (LxWxH):
Weight:
Accessories:
EUROLITE Omega Holder 22
EUROLITE TPC-10 Coupler, silver
EUROLITE TPC-10 Coupler, black
EUROLITE Safety bond A 4x1000mm up to 15kg silver
EUROLITE Safety bond A 4x1000mm up to 15kg black
EUROLITE DMX cable XLR 3pin 3m black
PSSO DMX cable XLR 3pin 3m black Neutrik
SOMMER CABLE DMX cable XLR 3pin 3m black Hicon
SOMMER CABLE DMX cable XLR 3pin 3m black Neutrik
PSSO PowerCon connection cable 3x1.5 3m
PSSO Combi cable PowerCon/XLR 3m
Please note: All information is subject to change without prior notice. 10.01.2017 ©
:
a
(steady state):
C
40/42
100-240 V AC, 50/60 Hz ~
80 W
6/19/29/32
3-pin XLR
via built-in microphone
20 Hz
45° C
55° C
0.5 m
0.1 m
T 2 A, 250 V
5
10 W QCL, RGBW
8°
360°
200°
610x215x235 mm
7 kg
No.
51786535
59006856
59006858
58010320
58010344
3022785H
30227810
30307457
3030746Z
3023503R
30227798
00105768, Version 1.0