Transmission Mode - Imperial BART 1 Bedienungsanleitung

6. OPERATION
6.2 TRANSMISSION MODE (TX)
Connect the BART 1 as shown on page 38 with an audio source,
whose signals you wich to send wireless to an audio output device.
Please use one of the optical or analogue audio cables included in
delivery content depending on the audio output of the device, you want
to connect.
> Please use the connections 7 or 8.
Please note:
Plugging in the analogue 3,5 mm stero jack cable to input 7
disables the optical input 8.
> Push the MOdE button as often, until the green TX LEd
starts blinking.
> BART 1 starts searching for available Bluetooth audio
devices.
Please make sure, that Bluetooth is activated on the device you
want to connect.
Once the connection is established, the blue TX LEd shines
permanetly.
37
IMPERIAL BART 1
E