Operation; Receiver Mode (Rx) - Imperial BART 1 Bedienungsanleitung

6. OPERATION

Connection to the powersupply
Connect the BART 1 with the uSB power supply, included in delivery
content to mains.
Hold the power button down for 2 seconds.
The device switches on.
With BART 1 audio signals can be transmitted or received,
dependend on the selected operation mode.
If you want to receive wireless Bluetooth audio signals from devices
like smartphones, tablet PCs etc, in order to transfer it to an audio
output device, like a Hifi system or audio amplifier, please select the
operation mode RX (reception mode).
If you want to send wireless Bluetooth audio signals from a Hifi sys-
tem or TV to an Bluetooth device like Bluetooth headphone or
Bluetooth speakers, please select the operation mode
TX (transmission mode).

6.1 RECEIVER MODE (RX)

> Connect the BART 1 as shown in picture on page 37.
> Please connect any kind of audio system disposed with an
audio input. Please use one of the audio cables, included in
delivery content, depending on the audio input of the device,
you want to connect.
> Please use the connections 9 or 10.
> Please make sure, that you have selected the correct input
source on the audio or Hifi system.
35
IMPERIAL BART 1
E