Werbung
Local Debug and operate the device
____________
1.
Install the Telit USB driver on your PC: https://www.pssystec.de/downloads/. The
PC will recognize 6 new USB Ports
For debug service:
1.
Open an Terminal program
2. Connect your PC on Telit High Speed Modem USB Port with USB port on the
Smartbox
3. you will get details of the running machine.
For setting generic AT commands:
1.
Open an Terminal program
2. Connect your PC on USB4 Port with USB port on the Smartbox
3. you can set now at commands
Note: Using Agent Versions <2.3.x you have to connect to USB3
Help for Setting up the Device database
____________
All devices which are connected to the SMARTbox are needed to define in Device
Database. The definition includes all supported datapoints of this connected device. Even
more, you can not only define the "physical datapoint" like register address, you can also
define if this datapoint comes in the cloud as a measurement, event, alarm or write value.
In addition some control field per datapoint are available which includes metadata like the
Unit or Display Category.
PSsystec SMARTbox IO Agent User Guide
11
Werbung
