SOLIS Typ 838 Gebrauchsanleitung Seite 41

To use the chopping bowl
Ensure the chopper is completely and properly
assembled as detailed on the previous page.
1. Insert the plug into a 230V power outlet and
turn the power on.
2. Select a speed between MIN and MAX on the
Variable Speed Control.
3. Depress the 'ON' button to turn the appliance
on and start the chopping blade.
4. Press the BOOST button if extra power is
required when processing or chopping.
5. When processing has finished switch off the
motor by releasing the 'ON' button and remove
the power plug.
6. Detach the chopping bowl and lid (refer to
instructions to right) (See Fig 4). Remove the lid
from the chopper bowl. Carefully remove the
chopping blade and use a spatula to scrape off
any attached food back into chopping bowl. Use
a spatula to remove food from the chopping
bowl.
4
E
Anleitung_Gourmet_Mixer_def.indd 41
To detach the chopping bowl and lid
Ensure the switch is released, power is turned off
at power point and the appliance is unplugged
(See Fig 5).
5
Hold the motor body with one hand, and using
thumb and finger, press on the two EJECT buttons
on either side of the motor body whilst holding
the chopper bowl and lid with the other hand
(See Fig 6).
6
Pull the motor body away from the chopping
bowl lid to detach.
E
41
5.3.2007 11:43:44 Uhr