SOLIS Typ 838 Gebrauchsanleitung Seite 40

SOLIS Gourmet Mixer Chopper – assembly & operation
To attach the chopping blade, chopping bowl
and lid
Remove blending shaft from motor body as on
Page 38.
Note
The chopping blade is extremely sharp
and should be handled only by the upper
plastic section.
Place the blade onto the metal pivot pin in the
base of the chopper bowl (See Fig 1).
Place the food inside the chopper bowl. Do not
exceed the maximum (MAX) marking.
1
E E
Place the lid onto the chopper bowl and press
down firmly to secure (See Fig 2).
2
40
Anleitung_Gourmet_Mixer_def.indd 40
Align the drive end of the motor body with the
corresponding part of the chopping bowl lid and
push down until the motor body 'clicks' and locks
onto the chopping bowl lid (See Fig 3).
Ensure chopper bowl lid is dry with no water left
inside before reattaching.
3
Note
Always place the chopping blade on its pivot pin
on the bottom of the bowl BEFORE placing any
stuff in the bowl. Do not lift the blade before the
complete chopping operation is finished.
E
5.3.2007 11:43:43 Uhr