General Operation - AEG FTE 400 Bedienungsanleitung

USER MANUAL
Contents
INTRODUCTION ......................................................................... 5

GENERAL OPERATION

Thermostat .............................................................................. 5
DAILY USE
Temperature setting .................................................................. 5
Child lock .................................................................................. 5
THERMOSTAT, SETUP MENU
Menu overview ........................................................................... 6
Settings ...................................................................................... 6
Max. temperature .................................................................... 6
Min. temperature ..................................................................... 6
Max. limit temperature ............................................................. 6
Min. limit temperature .............................................................. 6
Limit function ........................................................................... 6
Frost protection ....................................................................... 6
INTRODUCTION
FTE 400 is an all-in-one thermostat for DIN-rail mounting in an
approved cabinet. It covers the needs of a variety of applications
in which maximum comfort and minimum energy consumption are
required, e.g. electric floor heating, frost protection, ice and snow
melting, cooling, etc. The thermostat allows a required temperature
to be set within the range -19.5 to +40°C. The large backlit display
provides a clear view of status, while the three navigation buttons
allow easy menu operation.
GENERAL OPERATION
Night setback
Temperature
set point
ON/OFF switch
Frost protection
Left button
Lower temperature
Developed by OJ Electronics A/S - www.ojelectronics.com
Type FTE 400
English
Night setback / energy-saving function ................................... 6
Measured floor temperature .................................................... 6
Measured room temperature ................................................... 6
Application ............................................................................... 6
Scale ........................................................................................ 6
Temperature reading ................................................................ 6
Adjust offset............................................................................. 6
Control method ........................................................................ 6
PWM cycle time ....................................................................... 6
Differential temperature ........................................................... 6
Relay function .......................................................................... 7
EN50559 .................................................................................. 7
Program version ...................................................................... 7
ROUBLESHOOTING
Factory reset .............................................................................. 7
Error messages ......................................................................... 7
Thermostat
The ON/OFF button is used to turn the thermostat off "0" or on "I".
When the ON/OFF switch is in position "0", the relay is deactivated.
All settings are saved.
Basic functions like temperature and thermostat settings are
simple to perform. Whenever a button is pressed, the backlight-
ing will come on and stay lit for 30 seconds after a button is last
pressed.
DAILY USE
Temperature setting
The thermostat has a temperature setting range of -19.5 to +40°C.
The menu allows limits to be defined
• The required temperature is set using the left- or right-hand but-
ton. The temperature setting flashes on the display.
% or °C
• Five seconds after the setting has been made, the required tem-
perature will be shown on the display continuously.
Child lock
Child lock
Allows thermostats in public and other places to be locked, thus
preventing unauthorised alteration of the settings.
Heating ON
• Press and hold the left- and right-hand buttons simultane-
ously for 10 seconds. A symbol indicates that the thermostat
Right button
Raise temperature
is locked.
• The child lock can be released by pressing the left- and right-
Center button
hand buttons simultaneously for 10 seconds.
Programming
© 2017 OJ Electronics A/S - EHT Haustechnik GMBH
5