Reset To Default Settings - IKEA UPPLEVA Handbuch

16
Follow these steps to set it up.
1. Press MENU on the sound system bar,
toggle to UPPLEVA TV and press OK.
2. Select No if you don't have an UPPLEVA
TV*.
The setting "No" will prevent the sound
system to break in as the active source
when it is turned on.
The setting "Yes" will allow the sound
system to break in as the active source on
the TV, leaving the TV screen black until you
change back to your desired source.
You can change the setting back again if you
want to use the UPPLEVA sound system with
an UPPLEVA TV* at a later stage.
Follow these steps to set it up.
1. Press MENU on the sound system bar,
toggle to UPPLEVA TV and press OK.
2. Select Yes if you have an UPPLEVA TV*
*Only valid for these UPPLEVA TVs (stated
in article numbers):
402-565-98, 802-662-13, 202-565-99,
502-662-19, 802-566-00, 102-662-16,
602-566-01, 002-662-12, 002-565-81,
302-662-15, 602-565-78, 902-662-17.

Reset to default settings

Follow these steps to reset the sound
system to default settings.
1. Press MENU on the sound system bar to
enter the menu options. Use </> to select
RESET and press OK. The text Warning will
be shown on the panel display. Press OK.
2. Use </> to select Yes or No. Yes will
reset the sound system to factory settings
and No will jump back to menu options.