Choosing Sound Mode; Settings; Sound Settings; Panel Display Brightness - IKEA UPPLEVA Handbuch

To unpair a media device.
1. Press SOURCE on the sound system bar
and toggle to BLUETOOTH.
2. Press MENU on the sound system bar to
enter the menu options. Use </> and the
OK button to select FORCE UNLINK.
To disconnect a media device.
Switch off Bluetooth on your Bluetooth
device or simply unpair with UPPLEVA to
disconnect.
Choosing sound mode
You can choose between different sound
modes to improve the sound experience.
Press on the remote control to choose
between Standard, Music, News, Movies and
Personal mode.
To set up the personal mode
In the personal mode you can choose bass
and treble levels according to your own
preference. Follow these steps to set your
personal mode.
1. Press on the remote control and
toggle to Personal mode.
2. Bass level: Press MENU on the on the
sound system bar to enter the menu
options. Use </> to select BASS and press
OK. Use </> to choose on a scale from -6 to
6 and press OK to confirm. The higher level
you choose the more enhanced the bass
sounds will be.
3. Treble level: Press MENU on the on
the sound system bar to enter the menu
options. Use </> to select TREBLE and
press OK. Use </> to choose on a scale
from -6 to 6 and press OK to confirm. The
higher level you choose the more enhanced
the treble sounds will be.

6 Settings

Sound settings

To get a surround sound effect the WIDE
mode can be turned on:
1. Press MENU on the sound system bar to
enter the menu options. Use </> to select
WIDE and press OK. Use the > button to
switch to On and press OK to confirm.
The subwoofer bass level can be adjusted to
fit your preference.
1. Press MENU on the on the sound system
bar to enter the menu options. Use </>
to select SUB and press OK. Use </> to
choose on a scale from -9 to 0 and press OK
to confirm. The higher the value, the more
the bass will be enhanced.

Panel display brightness

The panel display brightness can be
adjusted to suit different surroundings or
preferences. Follow these steps to change
the brightness.
1. Press MENU on the sound system bar to
enter the menu options. Use </> to select
BRIGHTNESS and press OK.
2. Use the </> buttons to select High,
Auto or Low and press OK to confirm. The
High and Low settings will give a high
respectively low brightness of the panel
display while with the Auto setting the panel
display will dim down after 15 seconds of
non-use.

Change the standby time

To save energy the sound system will enter
standby automatically if there is no sound
playing. Follow these steps to adjust the
time before it enters standby.
1. Press MENU on the sound system bar to
enter the menu options. Use </> to select
AUTO STANDBY and press OK.
2. Use </> to select your preferred timing
and press OK to confirm.

UPPLEVA TV

We recommend you to do the following
setting if you have another TV (not
UPPLEVA*) connected with HDMI to the
UPPLEVA sound system. The setting makes
the TV and the UPPLEVA sound system
function in the best possible way together.
15