Operating Panel; First Use - Barbecook HERCULES 223.7100.000 Montageanleitung

press the "Function" button until the corresponding indicator light blinks
(power and timer or temperature and timer). The display shows the num-
ber "0". With the selection buttons (+,-), you can now select the operating
time in 1-minute intervals (up to max. 180 minutes). Then the display counts
down the duration in minutes. Once the time has passed, an acoustic signal
sounds and the device automatically goes into standby mode.
• Press the On/Off switch to shut down the device.
• Disconnect the mains plug from the outlet!

OPERATING PANEL

1. On/Off switch
2. Function key
3. Indicator light for power level, temperature and timer
4. LED display
5. Selection button (-), reduction of the power level, temperature or duration
6. Selection button (+), increase of the power level, temperature or duration
TIPS ON USING YOUR BARBECUE
Always barbecue using the "Temperature" function at level 180°C.

FIRST USE

We strongly recommend to clean the griddle and have it heat for 30 minutes on low
temperature (120°C) without cooking any food.
PREPARATION
Heat the griddle of your barbecue for up to 10 minutes on low temperature (120°C)
before adding any food. While the griddle is designed to have different tempera-
ture zones, it is possible to heat the griddle evenly by moving it sideways.
2.
1.
i
3. 4.
5. 6.
www.barbecook.com
|
9