Hdmi Audio - Toshiba Serie A3000 Bedienungsanleitung

PC audio
In order to receive sound from a connected PC, plug the
audio cable into the back of the television (as shown in
'Connecting a computer' section), then use the
PC/HDMI audio settings.
In the SET UP menu press down until
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU EXIT
Highlight PC/HDMI audio then use right to
2
select the PC option.
AV connection
PC/HDMI audio

HDMI audio

EXT2 input
Back
MENU EXIT
NOTE: Selecting the PC option will force HDMI
into digital audio.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
Input selection and
AV connections
SET UP
1/2
English
UK
OK
OK
OK
OK
Watch TV
PC
Digital
AV
Watch TV
continued
If the connected HDMI source does not support digital
audio, plug the audio cable into PC/HDMI audio on the
back of the television (as shown in the 'Connecting a
computer' section), then use the HDMI audio settings.
In the SET UP menu press down until
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU
In the AV connection menu press down to
2
highlight PC/HDMI audio and using right select
HDMI.
Then highlight HDMI audio and using left or
3
right select Auto., Digital or Analogue.
PC/HDMI audio
*
HDMI audio
EXT2 input
Back
MENU
If the sound is missing select an alternative
setting.
NOTE: HDMI supports digital and analogue
sound.
Certain formats of DVD disk may not output from
this TV (32/44.1/48kHz and 16/20/24 bits are
acceptable).
24
HDMI audio HDMI audio
SET UP
English
UK
OK
OK
OK
OK
Watch TV
EXIT
AV connection
HDMI
Digital
AV
Watch TV
EXIT
1/2