Programming The Individual Portions - Profitec Pro T64 Bedienungsanleitung

5.3 Programming the individual portions

Programming the grinding times takes place via the display.
The time for a single shot (one portion) is programmed in menu item Pt1.
The time for a double shot (two portions) is programmed in menu item Pt2.
Single Shot
+ –
Press and simultaneously until 'Pt1'
appears on the display.
+
Press in order to reach the submenu
of 'Pt1'.
Here you can adjust the grind time to a tenth
of a second by quickly pressing
After a short while, the timer will automatically
end programming once adjustment has
finished. The new value for "Pt1" is saved.
The stand-by display appears again.
Double Shot
+ –
Press and simultaneously until 'Pt1'
appears on the display.
-
Press in order to reach 'Pt2'.
+
Press in order to reach the submenu
of 'Pt2'.
Here you can adjust the grind time to a tenth of
a second by quickly pressing
After a short while, the timer will automatically
end programming once adjustment has
finished. The new value for "Pt2" is saved.
The stand-by display appears again.
+ -
or .
+ -
or .
17