Ten-Haaft Vision V5 Anleitung Seite 4

COntrOls: neW COntrOl deViCe
the new generation of control devices is being delivered from calendar week 42/2016. the new device is more
compact and has a lower profile than its predecessors. it handles all controls of your satellite system. Operation
and menu structure are identical to the previous generation. As with the previous model, the device can be
flush-mounted or surface-mounted in the vehicle.
SCopE of SUppLy
Control device Vision V5
Wall adapter
Western cable, 3 m
Cable adapter micro-usB-OtG
4 screws for wall-mounting
ADApTEr pLATE (ITEM NUMBEr: 3.280.1067)
An adapter plate is available if you wish to replace an older control device with this new-generation control
device. to order, contact us at: service@ten-haaft.de or +49 (0) 7231 / 58 588 0
Future software updates of your Vision iii control box must be made via a usB stick
(OtG adapter)! Your new control device is fitted with a mini-usB interface and
comes with a micro-usB-OtG cable adapter.
CAUTIoN: Devices of the new generation no longer provide the card slot as
was standard with the Vision III systems! The Mini-USB interface is externally
accessible.