Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Steps; Troubleshooting - D-Link DHP-P500AV Installationsaleitung

Powerline av 500 passthrough adapter
Vorschau ausblenden Andere Handbücher für DHP-P500AV:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
PrODUCT
SETUP

instAllAtion stePs

1. Plug the DHP-P500AV directly into an AC Wall outlet or power strip*
* D-Link recommends that to ensure best performance, you should ensure you plug the
DHP-P500AV directly into a wall socket. Plugging the device into a power strip may increase
the possibility of noise and interference in the network and therefore lead to below optimal
performance.
2. Connect the included Ethernet cable to the network cable connector located on the DHP-P500AV
and attach the other end of the Ethernet cable to the network or PC.
3. Insert the D-Link DHP-P500AV CD into your CD-ROM drive. Then starts utility installation.
4. After you have completed the D-Link DHP-P500AV Utility installation wizard, double-click the D-Link
Powerline AV Utility icon on your desktop to start the configuration of the DHP-P500AV.

TrOUBLESHOOTING

set-uP And ConFigurAtion ProBleMs
1. CAN I SECUrE my POwErLINE NETwOrK wITHOUT USING ANy SOFTwArE?
Yes, the DHP-P500AV features a push-button encryption technology to allow you to protect your
network easily. Please refer to the DHP-P500AV Manual supplied on the CD-ROM for setup
instructions.
2. wHEN I PLUGGED IN my DEVICES, THEy wErE ABLE TO SEE EACH OTHEr AND
CONNECT AUTOmATICALLy. wHAT IS THE SOFTwArE FOr?
By default, your DHP-P500AV is configured to work out of the box once plugged in and connected
to your router. However the software allows you further options to check the quality of your
connection, secure your network, and manage the devices.
3. my NETwOrK SEEmS TO BE PErFOrmING SLOwEr THAN ExPECTED. HOw CAN I
ImPrOVE THIS?
PLEASE ENSUrE THE FOLLOwING TO ENSUrE BEST NETwOrK PErFOrmANCE.
- Plug the DHP-P500AV directly into a wall socket and not into a power strip since some power
strips have surge protectors that may block power line signals.
- If this is not possible, then try plugging the device/s into a different power strip that is less
populated.
- Check that there are no other interfering appliances plugged into the same power strip,
particularly mobile phone chargers or hair dryers as Powerline networks are very sensitive to
electrical interference.
dhP-P500AV
3

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis