Product Nameplate And Information Label - ZARGES Z600 291361 Montageanleitung

1.3 Product Product nameplate
nameplate and
The product nameplate is attached to the support section on the back of the product.
information
> Replace the product nameplate if it becomes illegible.
label
1 Do not climb onto the back/the support section of the product.
2 Danger of hand injuries.
3 Fold the product away after use.
4 Unfold the stabiliser when using the product.
5 Before using the product, check that the orange platform hook is correctly
6 Release the orange locking mechanism to adjust the height. After adjusting
7 The product is height-adjustable.
Information label for 41328
The information label is attached to the outside of the side platform profile section.
> Replace the information label if it becomes illegible.
1
3 4
engaged.
the height, immobilise the locking mechanism.
4x > 2,65 m
2
5 6
!
For outdoor use, ballasting is required for the
product with Item No. 41328 starting from a
platform height of 2.65 m. This is done by
attaching a ballast weight, Item No. 41331,
to each stabiliser.
7
13