Connecting External Devices - Yamaha CX-A5000 Installationanleitung

3

Connecting external devices

Audio out (digital optical or TV
analog stereo)
OPTICAL
R L
O
R
L
b
c
HDMI OUT 1
HDMI jack
HDMI OUT
1
ARC (ZONE OUT)
AUDIO 1
(2 TV)
L
R
5 OPTICAL
O
AUDIO 1
(OPTICAL or AUDIO) jack
Turn on the unit
Press the bottom of the
front panel door gently to open the door
HDMI in HDMI out
HDMI
HDMI
HDMI
AV 1
2
HDMI (AV 1) jack
(1 BD/DVD)
The unit (rear)
The unit (front)
HDMI
BD/DVD player
HDMI
a
d
To an AC wall
outlet
1
Connect external devices to the unit.
a Connect a BD/DVD player to the unit with an HDMI
cable.
If the BD/DVD player is currently connected to the
TV directly with an HDMI cable, disconnect the
cable from the TV and connect it to the unit.
b Connect a TV to the unit with the other HDMI cable.
c Connect a TV to the unit with a digital optical cable
or a stereo pin cable.
This connection is required to play back TV audio
on the unit. This connection is not required if your
TV supports ARC (Audio Return Channel).
d Connect the supplied power cable to the unit and
then to an AC wall outlet.
• For information on how to connect radio antennas or other
external devices, see "PREPARATIONS" in "Owner's Manual".
2
Turn on the unit, power amplifier, TV and
BD/DVD player.
3
Use the TV remote control to change the
TV input to video from the unit.
The connections are complete. Proceed to the next
page to optimize the speaker settings.
• You can select the on-screen menu language from English (default),
Japanese, French, German, Spanish, Russian, Italian and Chinese.
For details, refer to "Owner's Manual". In this guide, illustrations of
English menu screens are used as examples.
3
En