Future Artist MIDI LOOPER Handbuch Seite 35

If you select all tracks at once and
•
at least record one track (e. g. pink track records, orange track paused), the left
button shines red
•
record no track and at least play one track, the left button shines green
•
record and play no track and at least one track is paused, the left button shines
yellow
•
all tracks are empty, the left button shines white
What happens, if you push a button when all Tracks selected simultaneously?
Hint: You can only switch between play and pause when all tracks selected simultaneously.
If the left button shines red at selection of all tracks, it means that you record in at least
one track (see description above). However, to push a button does not effect, that all
tracks at once switch to record mode.
•
If you push the right button all tracks are paused at once. The left button
shines yellow.
•
If you push the right button again, while all tracks are paused, then you stop
the internal clock. No MIDI Clock signal is sent any longer via MIDI OUT or USB.
any more. Left button shines yellow.
•
If you push the right button again for at least 2s, while the internal clock is
paused, you will delete all tracks:
➢
➢
➢
The clock starts again as soon as you start one or all tracks simultaneously (by
pushing the left button or by an external MIDI start command).
•
If you push the left button, you will play all tracks at the same time. The left
button shines green. All tracks start at the beginning and not at the point
where they were paused.
34
All notes and controller data are deleted.
The quantization is set to default (96th).
The options (bpm, clock source, int/ext/usb, soft thru on/off)
remain unchanged.