How to start the MIDI LOOPER
You will find two MIDI ports (1) and (2) on the back of the MIDI LOOPER, a 3.5 mm jack
adapter (3) and a USB socket (4).
MIDI output: Plug your sound generator (e.g. a synthesizer) for receiving MIDI
(1)
signals in the output.
MIDI input: Plug your MIDI Controller (e.g. a MINI Pad Control) in the input.
(2)
Jack adapter: Plug your foot switch in the jack adapter. You will find a jack
(3)
adapter with 3.5 mm on 6.3 mm in the package.
USB socket: Plug the supplied USB cable into the USB socket. Connect the
(4)
other cable end with a computer or for power supply with a USB power supply.
27