Quickstart
The right button shows the selected track (blue, violet, pink, orange). The left button
shows the status of the selected track (white = empty, red = record, green = play, yellow =
pause).
The left knob serves for switching between the tracks. The right knob serves for adjusting
the quantization.
Mode
Switch on
Record
Play
/ Overdub
Instruction
Connect the MIDI LOOPER with your
setup (see chapter "
Which setup options you have")
(1) Push the left button
(2) Play with MIDI input device or
Push the left button again
Push the left button
When you push the left button, you
are switching between play and
overdub
Display left button
white
(1) flashes red =
ready for
recording
(2) light red =
recording
green
/ red
25