AXITEC Energy GmbH & Co. KG
Otto-Lilienthal-Straße 5
71034 Böblingen, Germany
5.
Maintenance and cleaning
You should do a frequent short inspection of your Master Unit for keeping a long
durability and avoidance of an operational system's breakdown.
Please also consider your national standards and provisions regarding the
requirements of battery- and/or PV power installations and their equipment.
Potentially, you have to do an electrical test procedure once a year as it is to adduce
in some european countries, e.g. Germany.
Visual inspection
Depending on the installation side and the environmental conditions you have to
expect some pollution on the device's surface. Clean carefully with the help of a moist
cloth! During this time do not open the case of the device under any circumstances!
6.
How to stock the "Master Unit"
Demands:
dry conditions
ambient air temperature ranges from -25°C up to +55°C
for a maximum of 24 hours: temperature might get higher up to +70°C
7.
Disposal
Disposal is due to your national/local regulations. The Master Unit is to classify as
"electronic waste" (it is no "household waste"!)
Take care of that and protect the environment!
Page -8- of -10-
10011697_installation manual Master Unit_EN_V1.1