AXITEC Energy GmbH & Co. KG
Otto-Lilienthal-Straße 5
71034 Böblingen, Germany
1.
Scope of application and appropriate usage
You may use the battery-protection series "Master Unit" in general for stationary or even
mobile battery storage systems within different technologies (Lead, Lithium...) as a
protection
against
charging/discharging is limited to max. 75V DC. The circuit breaker's nominal current-
values are matching the Axitec Energy systems requirements and making the maximum
safety and availability for the system feasible.
If you observe a releasing of circuit breakers there must be a failure in the system! Before
switching on again the circuit breaker you have to ensure the system's error-free
performance!
The "Master Unit" should be installed in close distance to the energy-storage unit. This
provides the best protection for the system and cabling!
short-circuit current
will not be
interrupted!
Page -3- of -10-
overcurrent
and
10011697_installation manual Master Unit_EN_V1.1
short-circuit
current.
The
voltage
for